Products & Services

PUMPSTATIONS Corrosion Protection Services have carried out a large number of pump station refurbishment works throughout South East Queensland (refer experience page). New pump stations can have a liner applied before commissioning so they are corrosion resistant and prevent degradation before it happens. Older pump stations are rebuilt to original dimensions, providing ongoing structural integrity, then refurbished to prevent any further degradation. Pump stations in use are trowelled back to their original dimensions, ensuring ongoing structural integrity and corrosion resistance. The refurbished surface is left with a smooth even finish ensuring easier cleaning and maintenance. All our products are corrosion resistant from the first layer through to the top layer. Pump stations can be worked live and refurbished to water level, so stations remain on-line.

MANHOLES On manholes we offer two services, dependant on their condition. They can either be relined, or in less severe cases, the joints can be refurbished, or joints and a seal coat can be applied. Joint refurbishment helps prevent infiltration from salinity and tree roots etc. coming through the joints. The refurbished surface is left with a smooth even finish ensuring easier cleaning and maintenance. Even when degraded to Rio or dirt, most manholes can be rebuilt to original dimensions, ensuring ongoing structural integrity. A trowellable liner is then applied to ensure ongoing corrosion resistance. In Manhole relines any repairs to benching can also be done. There is often no need to replace convertor slabs as these can also be refurbished. There is no need to alter the existing structure and all work is carried out from inside the structure.

RISING MAINS Corrosion Protection Services has been involved in rising main repairs at Robina on the Gold Coast. This rising main pipeline was refurbished by Corrosion Protection Services to prevent raw sewerage entering the water below and turning into a major environmental disaster. Our system was applied to the rising main to assist structural integrity and strengthen potential weak spots, preventing further blowouts.

STORMWATER Corrosion Protection Services was involved in the reline of storm water pipes on the Gold Coast. A chemical spill badly degraded the concrete in this storm water pipe on the Gold Coast. Using our products, the pipes were rebuilt and refurbished back to their original dimensions ensuring ongoing structural integrity and preventing further corrosion should chemicals re-enter the system.

GREASE TRAPS / ARRESTORS Corrosion Protection Services has developed new technology to refurbish existing grease traps instead of having to replace your current grease trap. Corrosive gases can eat away the sides, base and baffles of a grease trap allowing trade waste to flow directly into the sewer. When refurbishing we often find after water blasting, there is little structure left in the grease traps. Our new technology allows us to refurbish the grease trap to ensure ongoing strucural integrity before installing a one piece corrosion resistant liner. This is an ideal option where access is a problem, or to extend the life and/or capacity of your grease trap. Concrete has a limited lifespan and may need further refurbishment works within a few years. Our Liner system will extend the life of the grease trap and make it 100% corrosion resistant. McDonalds, Kentucky Fried Chicken, Seaworld, Movieworld, The Marriott Hotel (Surfers Paradise) together with numerous private clientelle have recognised our innovative trade waste system and utilise it for necessary grease trap refurbishment work. Sydney Water is one of the many local government entities that has given approval for our product to be used within their shire. We have upgraded to stainless steel guides, as these are often the first things needing replacement ensuring customer satisfaction with the COMPLETE product. Current Local Government Legislation makes 250ltr grease traps obsolete; they should be updated to a minimum of 550ltr to comply with legislation. We can increase the capacity of a 250ltr up to 550ltr to ensure compliance. Our system is environmentally friendly, often no need to excavate (apart from conversions), and minimal alteration to the existing structure. All work is done on site, in conjunction with staff and management to ensure there is no loss of trade during refurbishment. Chequer plate or gas tight lids can be replaced if needed. The grease arrestor at the NSW State Library (see 2 pictures on right) was seven floors down, with access via the lift only, creating difficulties in installing a new grease arrestor. CPS refurbished the existing grease arrestor, together with an outlet conversion and new lid. In NSW older grease arrestors have their outlet located at the bottom of the grease arrestor. We can install an outlet conversion, bringing the outlet in line with current grease arrestor outlet positions.

	The Council swimming pool in Hervey Bay undergoing refurbishment. With the correct preparation and application of our products, we were able to overcome extreme movement in the joints of this swimming pool, saving many dollars in water consumption. Corrosion Protection Services can –
Refurbishment of the Hervey Bay Pool	Extend 250ltr traps to 550ltr traps Extend 550ltr traps to 1,000ltr traps Install liners up to 2,000ltrs If you have a sewer or trade waste problem, call Kel on Mobile: 0407 940 409 or our office on (07) 41940 400 and discuss what we can do for you!!!! NO FIX - NO CHARGE